Skip to main content

Extension

Open Main MenuClose Main Menu

What is Wood Plastic Composite?

Wood plastic composite is panel or lumber product made from recycled plastic and small wood particles or fibers. Wood plastic composites are relatively new products as compared to the long history of natural lumber or traditional wood composites such as particleboard or fiberboard.

 

This fact sheet summarizes some of the basic manufacturing steps, physical and mechanical properties, as well as major uses of WPC.

 

Wood plastic composites are widely used in the U.S. They are manufactured by mixing wood particles as fine as flour and recycled plastics. North American WPC market have reached almost $1 billion in sales.This is an  increase of 200% between 2001 and 2006, and it is expected that 20% annual growth will take place within the next 5 to 6 years. As WPC capacity increases, new products are being developed such as door stiles, rails and window lineal.

 

Main production steps and properties of WPC 

In general, manufacturing of WPC is a two-step process. Combination of wood and thermoplastic such as high density polyethylene (HDPE),  low density polyethylene (LDPE) and polyvinyl chloride (PVC) are mixed together dough-like-consistency called compounding. Mixing can be handled by either batch or continuous process.

 

In addition to the main ingredient wood with grain size ranging from 20 to 60 mesh, plastic coupling agents, stabilizer, foaming agents or dyes also are added to enhance properties of the final product for a particular use.

 

For example, lubricants improve  appearance of the surface. There are three common forming methods for WPC. Extrusion method, which forces molten composite through a die, is shown in Figure 1. In the case of injection molding method, molten composite is forced into a cold mold. The third one presses molten composite between mold halves.

 

Extrusion manufacturing process of wood plastic composite.

Figure 1. Extrusion manufacturing process of wood plastic composite.

 

 

The majority of WPC is produced by extrusion process, which uses variety of extruder types such as single screw or double screw to form final shape of the material. Figures 2, 3 and 4 illustrate examples of WPC products and a flowchart of a typical manufacturing process, respectively.

 

Different types of wood composite products.

Figure 2. Different types of wood composite products.

 

 

 

Application of wood plastic composites as decking.

Figure 3. Application of wood plastic composites as decking.

 

 

 

 

A typical production flowchart of wood plastic composite.

 

Figure 4. A typical production flowchart of wood plastic composite.

 

Most of the physical and mechanical properties of WPC depend mainly on the interaction developed between wood and thermoplastic material. One of the most efficient ways to improve this interaction is by incorporating a coupling agent as an additive. In general, such additives help the compatibility between hydrophilic wood, which absorbs moisture easily, and hydrophobic plastic, having lack of affinity for water, allowing the formation of single phase composite and resulting in a product with better dimensional stability than solid wood.

 

Traditional pressure treated wood with mostly chromate copper arsenate (CCA) is facing  growing dissatisfaction among the user due to health reasons and environmental pollution. Additionally, as of  December 2002, wood treated with arsenic-based compounds has been banned when there is a direct contact with humans such as decking material, playground equipment or picnic tables.

 

Use of WPC lumber, either in the form of solid cross section or with tubular structure as shown in Figure 2, has been very popular material as a substitute for treated wood products. Table 1 also shows typical mechanical properties including modulus of elasticity (MOE) and modulus of rupture (MOR) of WPC. MOE and MOR are described in a previous factsheet FAPC-162  Strength Properties of Wood for Practical Applications.

 

Table 1. Mechanical properties of typical wood plastic composite.

  Bending (psi)   Tensile (psi)  
WPC MOE MOR MOE MOR
60% polypropylene
40% wood particles
Density 0.90 g/cm3
439,000 6,410 561,000 3,680
60% polypropylene
40% hardwood fibers
Density 1.05 g/cm3
471,000 6,950 609,000 4,090
57% polypropylene
40% hardwood fibers
3% coupling agent
Density 1.03 g/cm3
467,000 10,500 613,000 7,580

From C. Clemons 2002. Wood-Plastics Composites in the United States. Forest Products Journal. 52(6):10-18

 

Some advantages and disadvantages of WPC

The greatest advantage of WPC is its environmentally friendly approach of using waste wood and recycled plastic material. Wood composite plastics have low maintenance cost as compared to that of solid wood. One of the main reasons responsible for the fast growth of WPC is its low-life cycle cost.

 

In general,  WPC deck has a production cost of about 15% more as compared to that of pressure-treated lumber, but requires a lower maintenance cost. The actual payback period is estimated at 3 to 5 years compared to pressure-treated decking material. Its excellent dimensional stability along with less variability also can be considered as another main advantage of WPC products.

 

Most of the research in many countries is concentrating on the durability and extended service life of WPC due to large interest in its outdoor use.

 

In fact, WPC was originally marketed as being naturally decay resistance against fungi or insect attack. However, it has been shown that WPC will still absorb some moisture and eventually decay but at much slower rate than solid wood.

 

Thermal expansion, creep (time dependent deformation), high density and difficult application of paint would be some of the other disadvantages of WPC.

 

Other information about WPC

Clemons, C. Wood-Plastic Composites in the United States. 2002. Forest Products Journal. 52 (6)10-18.

 

Forest Products Society. 2001. Proc. Sixth International Conference on Woodfiber-Plastic Composites. Forest Products Soc. Madison, Wisconsin 289 p.

 

Smith, P. and M.Wolcott.  2006. Opportunities for Wood/Natural Fiber-Plastic Composites in Residential and Industrial Applications. Forest Products Journal 56 (3) 4-11.

 

Smith, P. and K.D. Bright. 1999. New market development for wood plastic composite decking products. Proc. Fifth International Conference on Woodfiber-Plastic Composites. Forest Products Soc. Madison, Wisconsin 257-268 p.

 

Robbins, A.E. 2002.State of recycled plastics lumber industry 2001-2002. Plastic lumber industry in competitive markets. Annual Meeting of Plastic Lumber Assoc., Akron, OH. 10 p.

 

Salim Hiziroglu
FAPC Value-added Wood Products Specialist

Was this information helpful?
YESNO
Fact Sheet
Kosher and Halal Slaughter

By Courtney Bir, Nathan Dethloff, Rodney Holcomb, JJ Jones and Josh Campbell. Learn about Kosher and halal, two distinct types of ritual slaughter observed by people practicing Jewish and Muslim religions, respectively. In this fact sheet we discuss the requirements for both kosher and halal, as well as considerations for meat producers interested in ritual slaughter.

Cooking & Food SafetyFood ProcessingFood ProductsFood SafetyLivestockWaste Management
Fact Sheet
Traceability in the United States Food Supply

By Claudina Padilla Quiñonez, Kevin Moore and R. Scott Frazier. Learn about how food product and process safety is regulated under the U.S. Food and Drug Administration Food Safety Modernization Act (FSMA). An important part of FSMA is food product traceability. This allows for the rapid determination of where contamination may have occurred and to enhance the general safety of the U.S. food supply. This fact sheet describes some the basics of food product traceability regulations that are now in place and others that are on the horizon.

Food ProductsFood Safety, Quality Management & SanitationRegulations, Customer Requirements & Compliance
Fact Sheet
Firewood: Recommendations for using Firewood as an Indoor Heating Source in Oklahoma

By Ryan DeSantis. Learn the best methods to use firewood as an indoor heating source in Oklahoma.

Forest Ecology, Management & CareForestryProcessing Wood
VIEW ALL
MENUCLOSE