Skip to main content

Extension

Open Main MenuClose Main Menu

Pesticides in Residential Areas – Protecting the Environment

A well-maintained, healthy lawn and lush ornamentals increase property values, help prevent erosion, conserve water, deaden sound, supply oxygen, and increase aesthetic and recreational values.  But landscaping requires intensive care, such as watering, fertilizing, mowing, and pest control.  Protecting the environment also requires care because some pesticides, specifically insecticides, herbicides, and fungicides, may be washed from lawn areas to surface and ground waters.

 

Public concern generally focuses on the use of pesticides and fertilizers on large tracts of agricultural land.  But, for the urban and suburban environment, residential use may be a greater concern.  Pesticides, fertilizers, and other active materials are used extensively in the urban, suburban, and residential environment.  Studies have shown that, after a heavy summer rain, nitrates and pesticides increase dramatically in streams and lakes near areas of urban or suburban development.

 

Use of pesticides and fertilizers in residential areas is very different from agricultural uses.  In residential areas, chemicals are applied to smaller areas, but applications may be heavier and more frequent.  Some lawns, for example,  receive 10 or more pesticide applications per season, and two or three times as much nitrogen as a typical field crop.

 

Pesticide Movement

Pesticides are designed to stay in place to control the target pest, then degrade into harmless products. However, some pesticides can move from the site of application to the surrounding area.  Pesticides leave the target area by degradation or breakdown, evaporation to the atmosphere, leaching to ground water, and runoff to surface water.

 

Runoff is the most direct route to surface ponds, lakes, or streams.  Even if no body of water is visible, runoff may reach a water body by way of ditches, storm sewers, or underground drainage pipes.  This is a concern particularly in subdivisions where numerous manicured lawns are treated with pesticides and fertilizers.  Runoff from such areas can upset nearby ecosystems and threaten wildlife.  Pesticides differ in their relative runoff potential, as shown in the following tables.

 

Leaching is the extraction of chemicals from soil by water moving through the soil.  Most pesticide chemicals degrade rapidly in soil.  But, if they are highly leachable, they may reach ground water before they are degraded. In rainy periods or when there is excessive irrigation, leachable chemicals are likely to move to ground water. The tables show the relative leaching potential of commonly used chemicals.

 

Degradation is the time it takes a pesticide to degrade (break down into simpler substances).  Degradation rate is measured by half-life—the time it takes for half of the active ingredient to break down.  For example, half-life of the insecticide Sevin is 10 days.  Therefore, one ounce of active ingredient would degrade to a half ounce in 10 days.  In another 10 days, only one-fourth ounce (half of a half ounce) would remain, and so on.  Materials with a shorter half-life are less persistent than those with a longer half-life.  Tables 1 through 3 show the degradation rate, expressed as half-life in soil, for some commonly used pesticides.

 

Evaporation (or volatilization) is the loss of pesticide to the atmosphere.  In most cases, this is not a big concern for water quality, although some evaporated pesticide may return to earth on dust particles or in rainfall.  Evaporation can also contribute to air pollution.  Perhaps the biggest concern is that evaporative loss reduces the effectiveness of the pesticide, requiring extra pesticide treatments with more handling, rinsings, and disposal problems.

 

Recommendations

  1. Always read the label before purchasing a pesticide.  Read it again before applying.
  2. Do not apply pesticides when rain is imminent.  Pesticides need time to dry and work.
  3. Do not spray pesticides when it is windy.
  4. Note the temperature range specified on the label.  High temperature may increase evaporative loss or cause plant injury.
  5. Use the correct amount of water.  If too much water is used, the pesticide may not work properly and may be more likely to run off.
  6. Calibrate your sprayer.  Too little won’t work.  Too much may damage the environment.
  7. Use Integrated Pest Management (IPM) to control pests.
  8. To protect ground water, select pesticides with low leaching potential.
  9. To protect streams and lakes, consider runoff potential.
  10. Where possible, substitute low-toxicity, short-lived chemicals for high-toxicity and long-lived chemicals.
  11. Finally, use care when handling chemicals and disposing of the leftover material.

 

Integrated Pest Management for Residential Areas

Integrated Pest Management (IPM) uses biological principles, cultural practices, and some chemicals to control pest populations with minimal environmental impact.

  • Select adapted plant materials, considering resistance to commonly occurring pests.
  • Select high-quality seed or sod, free of weeds, insects, and disease.
  • Use proper planting and establishment techniques to minimize perennial weeds and other problems.
  • Manage fertility with soil tests to maintain vigorous growth without excess fertilizer.
  • Identify status and abundance of pests.
  • Adjust cultural practices, such as mowing, fertilization, irrigation, aerification, and dethatching.  Use mechanical alternatives, such as hand pulling or cultivation, instead of a pesticide.
  • Use spot treatments instead of broadcast application.

 

Impact of Pesticides on Aquatic Organisms

Pesticides in the environment are generally a concern because they kill organisms other than the target insect, weed, or disease organism.  Toxicity varies by species and may be either acute or chronic.  Acute toxicity is fast-acting, affecting organisms directly.  Chronic toxicity is more subtle.  It results from low-level, frequent exposure, and its effects may not be recognized until much later.

 

Acute toxicity is measured by testing the chemical on a population of organisms, such as invertebrates, fish, or birds.  Toxicity is reported as the median lethal dose (LD50) or the median lethal concentration (LC50).  LD50 is the dose (mg of chemical/kg of body weight) that will kill 50 percent of the designated organisms in a specified period of time, usually 24 to 96 hours.  The lower the LD50 or LC50, the more dangerous the chemical.  Toxicity of some commonly used pesticides to mallard ducks, fish, and aquatic invertebrates is shown in the tables.

 

Bioaccumulation

Bioaccumulation is the concentrating effect that occurs when many microscopic organisms, contaminated by pesticides, are eaten by organisms higher in the food chain. For example, DDT sprayed on insects accumulated in small mammals, birds, and people. The concentration of pesticides in the tissue of organisms at the top of the food chain may be far greater than the concentration in the water or surrounding environment. Accumulated pesticide may kill the higher organism, or it may have more subtle effects, such as reducing the organisms reproductive capabilities. Today’s pesticides do not bioaccumulate.

 

Reducing Environmental Impact

Pesticide formulation, application timing, and application method can affect runoff and leaching. For example, if it rains, wettable powder formulations are much more likely to be washed off a surface than are emulsified concentrate formulations.3 Timing is important because effectiveness varies with growth stage and pest population. Spraying for a pest that is not present can waste chemicals and threaten the environment. Likewise, some application methods, such as spot treatment, may be better than broadcast spay.

 

Pesticide selection can be adjusted to avoid known problems.  For example, if soils are sandy or ground water is near the surface, a pesticide with low leaching potential is desirable.  If a pond with fish or ducks is nearby, the chemical’s runoff potential and its specific toxicity should be considered.

 

Care in application and disposal.  Improper handling of chemicals, indiscriminant spraying, and dumping are serious concerns.  Do not apply more pesticide than allowed by the product’s label, and never pour pesticide in a storm sewer or other channel.

 

Water management.  Over-watering lawns can leach pesticides below the reach of plant roots.  This increases the chance of contaminating ground water, particularly if the chemical has high leaching potential.

 

Identify your pests and use Integrated Pest Management (IPM) [see box on page 2].  Exploring the options for pest control may require expert advice, as well as personal research.  For information about pest identification and IPM, visit your County Extension Office.

 

Table 1. Characteristics of commonly used insecticides.

         
  Insecticides Relative Runoff Potential2,3 Relative Ground Water Leaching Potential3 Half-Life in Days3,10
  Affirm (Abamectin)      
  Amdro (Hydramethylnon) large very small 10
  Baygon (Propoxur)      
  Cygon (Dimethoate) small medium 7
  Diazinon (Diazinon) medium large 30
  Dursban (Chlorpyrifos) large small 30
  Dylox (Trichlorfon) small large 27
  Ficam/Turcam (Bendiocarb)     5
  Kelthane (Dicofol) large small 60
  Malathion (Malathion) small small 1
  Methoxychlor (Methoxychlor)     120
  Oftanol (Isofenphos)     150
  Omite (Propargite) large small 56
  Orthene (Acephate) small small 3
  Pentac (Dienochlor)      
  Pyrethrins (Pyrethrins)      
  Rotenone (Rotenone)      
  Sevin (Carbaryl) medium small 10
  Tempo (Cyfluthrin)     30
      Relative Toxicitya,b  
  Insecticides Mallards Fishc Invertebrates
  Affirm (Abamectin) medium medium  
  Amdro (Hydramethylnon) very low    
  Baygon (Propoxur) high medium  
  Cygon (Dimethoate) high medium  
  Diazinon (Diazinon) very high high  
  Dursban (Chlorpyrifos) medium very highd  
  Dylox (Trichlorfon) high high  
  Ficam/Turcam (Bendiocarb)      
  Kelthane (Dicofol)   high  
  Malathion (Malathion) low very highe  
  Methoxychlor (Methoxychlor) very low very high high
  Oftanol (Isofenphos)      
  Omite (Propargite) very low highe  
  Orthene (Acephate) medium very low  
  Pentac (Dienochlor)   high  
  Pyrethrins (Pyrethrins) very low very high  
  Rotenone (Rotenone) very low very high very low
  Sevin (Carbaryl) very low medium medium
  Tempo (Cyfluthrin) very low very high  

 

aToxicity to mallard ducks1,4,7,9 is based on LD50

very low = more than 2,000mg/kg

low = >500 to 2,000

medium = >50 to 500

high = 10 to 50

very high = less than 10mg/kg

bToxicity to fish4,6,8 and aquatic invertebrates1,8 is based on 48- or 96-hour LC50

very low = more than 100mg/l

low = >10 to 100

medium = >1 to 10

high = 0.1 to 1

very high = less than 0.1mg/l

cFish toxicity based on catfish and bluegill

dCatfish are less sensitive

eBluegill are less sensitive

 

Table 2. Characteristics of commonly used herbicides.

         
  Herbicides Relative Runoff Potential2,3 Relative Ground Water Leaching Potential3 Half-Life in Days3,10
  Arsonate/Bueno (MSMA Soluble Salt) large small 100
  Balan (Benefin) large small 30
  Banvel (Dicamba Soluble Salt) small large 14
  Betasan (Bensulide) large small 120
  Dacamine/Weedar (2, 4-D) small medium 10
  Dacthal [DCPA (Chlorthaldimethyl)] large small 100
  Devrinol (Napropamide) large medium 70
  Dicamba (Dicamba)      
  Endothal (Endothall)     7
  Kerb (Pronamide) large small 60
  Mecoprop (MCPP) Soluble Amine Salt small large 21
  Montar/Phytar 560/Rad-E-Cate      
  Pendimethalin (Pendimethalin) large small 90
  Ronstar (Oxadiazon)     60
  Roundup/Kleenup (Glyphosate Amine Soluble Salt) large small 47
  Sencor (Metribuzin) medium large 40
      Relative Toxicitya,b  
  Herbicides Mallards Fishc Invertebrates
  Arsonate/Bueno (MSMA Soluble Salt)   very low  
  Balan (Benefin) very low very high  
  Banvel (Dicamba Soluble Salt) low low very low
  Betasan (Bensulide)      
  Dacamine/Weedar (2, 4-D)   very lowd  
  Dacthal [DCPA (Chlorthaldimethyl)]   very low  
  Devrinol (Napropamide)      
  Dicamba (Dicamba) low low  
  Endothal (Endothall)      
  Kerb (Pronamide)      
  Mecoprop (MCPP) Soluble Amine Salt   low  
  Montar/Phytar 560/Rad-E-Cate      
  Pendimethalin (Pendimethalin) very low high  
  Ronstar (Oxadiazon) low medium  
  Roundup/Kleenup (Glyphosate Amine Soluble Salt)   very low medium
  Sencor (Metribuzin) very low medium medium

 

aToxicity to mallard ducks1,4,7,9 is based on LD50

very low = more than 2,000mg/kg

low = >500 to 2,000

medium = >50 to 500

high = 10 to 50

very high = less than 10mg/kg

bToxicity to fish4,6,8 and aquatic invertebrates1,8 is based on 48- or 96-hour LC50

very low = more than 100mg/l

low = >10 to 100

medium = >1 to 10

high = 0.1 to 1

very high = less than 0.1mg/l

cFish toxicity based on catfish and bluegill

d2,4-D butoxyethanol ester has medium to high toxicity to fish

 

Table 3. Characteristics of commonly used fungicides.

         
  Fungicide Relative Runoff Potential2,3 Relative Ground Water Leaching Potential3 Half-Life in Days3,10
  Banner (Propiconazole) medium medium 110
  Bayleton (Triadimefon) medium medium 26
  Benlate/Tersan (Benomyl) large small 240
  Bordeaux Mix (Bordeaux Mix)      
  Captan (Captan)     3
  Carbamate (Ferbam) medium medium 17
  Cyprex (Dodine Acetate Soluble Salt) large small 2010
  Daconil (Chlorothalonil) large small 30
  Dithane/Manzate (Mancozeb) large small 70
  Dithane (Maneb) medium small 7010
  Dyrene (Anilazine) small small 1
  Folpet (Folpet)      
  Funginex (Triforine) medium small 21
  Fungo/Topsin (Thiophanate-methyl) small medium 1010
  Karathane (Dinocap) medium small 5
  Koban/Terrazole/Truban (Etrazol/Etridiazole) large small 10310
  Ornalin/Vorlan (Vinclozolin) medium medium 20
  Pipron (Piperalin) medium small 30
  Rubigan (Fenarimol) medium small 360
  Subdue (Metalaxyl) small medium 70
  Terraclor/Trufcide (PCNB) large small 21
      Relative Toxicitya,b  
  Fungicide Mallards Fishc Invertebrates
  Banner (Propiconazole)   medium  
  Bayleton (Triadimefon)   low  
  Benlate/Tersan (Benomyl) low very highd  
  Bordeaux Mix (Bordeaux Mix)      
  Captan (Captan) very low very highd  
  Carbamate (Ferbam)      
  Cyprex (Dodine Acetate Soluble Salt) low    
  Daconil (Chlorothalonil) very high very high very high
  Dithane/Manzate (Mancozeb)   medium  
  Dithane (Maneb)      
  Dyrene (Anilazine) very low high  
  Folpet (Folpet) low medium  
  Funginex (Triforine)   very low  
  Fungo/Topsin (Thiophanate-methyl)      
  Karathane (Dinocap) low medium  
  Koban/Terrazole/Truban (Etrazol/Etridiazole)      
  Ornalin/Vorlan (Vinclozolin)      
  Pipron (Piperalin)      
  Rubigan (Fenarimol) very low high  
  Subdue (Metalaxyl)   low  
  Terraclor/Trufcide (PCNB) very low    

 

aToxicity to mallard ducks1,4,7,9 is based on LD50

very low = more than 2,000mg/kg

low = >500 to 2,000

medium = >50 to 500

high = 10 to 50

very high = less than 10mg/kg

bToxicity to fish4,6,8 and aquatic invertebrates1,8 is based on 48- or 96-hour LC50

very low = more than 100mg/l

low = >10 to 100

medium = >1 to 10

high = 0.1 to 1

very high = less than 0.1mg/l

cFish toxicity based on catfish and bluegill

dBluegill are less sensitive

 

References

  1. Extoxnet, 1989.  “Pyrethrins and Pyrethroids.”  Michigan State University.
  2. Terrell, C. R., and P. B. Perfetti.  1989.  Water Quality Indicators Guide:  Surface Waters, U. S. Dept. of Agriculture, Soil Cons. Serv. SCS-TP-161.
  3. Water Quality Reference Handbook.  1988.  USDA-SCS.
  4. Hartley, D., and H. Kidd, (Eds.). 1983.  The Agrochemicals Handbook, 2nd ed.  The Royal Society of Chemistry, The University Nottingham, England.
  5. “Avian Single-Dose Oral LD50.”  1985.  Hazard Evaluation Division Standard Evaluation Procedure.  Environmental Protection Agency, Washington D.C.
  6. Toth, S. J., G. L. Jensen, and M. L. Grodner.  “Acute Toxicity of Agricultural Chemicals to Commercially Important Aquatic Organisms.”  Louisiana Coop. Ext. Serv. Publ. 2343.
  7. Smith, G.  1970.  Pesticide use and toxicity in relation to wildlife—organophosphorus and carbamate compounds.  U.S. Dept. of Fish and Wildlife Serv. Res. Publ.  Washington D.C.
  8. Johnson, W. W. , and M. T. Finely.  1980.  Handbook of acute toxicity of chemical to fish and aquatic invertebrates.  U.S. Dept. of Int., Fish and Wildlife Serv. Res. Publ.  137. Washington D.C.
  9. Hudson, R. H., R. K. Tucker, and M. A. Haegele.  1984.  Handbook of Toxicity of Pesticides to Wildlife, 2nd ed.  U.S. Dept. of Int., Fish and Wildlife Serv. Res. Publ. 153.  Washington D.C.
  10. Hornsby, A., and Audustgin (Eds.).  1991.  Pesticide Parameter Database.  In:  Handbook on Managing Pesticides for Crop Production and Water Quality Protection.  SS-SOS-3.

 

 

Brad Kard
Professor, Structural and Urban Entomology

 

Kevin Shelton
Extension Pesticide Coordinator

 

Charles Luper
Extension Associate

Was this information helpful?
YESNO
Fact Sheet
Corn Herbicide Rotation Restrictions to Wheat in Oklahoma

By Josh Lofton, Liberty Galvin and Josie Rice. Learn about frequently used herbicides in Oklahoma corn production, along with their corresponding rotational restrictions for wheat.

CornCropsGrains & OilseedsHerbicidesInsects, Pests, and DiseasesPesticidesWheat
Fact Sheet
First Report of Resistance to QoI-Fungicides in Pathogens Causing Cercospora Leaf Blight of Soybean in Oklahoma

By Maira Duffeck and Josh Lofton. Learn about the first report of Cercospora isolates resistant to QoI-fungicides in Oklahoma.

FungicidesInsects, Pests, and DiseasesPesticides
Fact Sheet
Honeybee Diseases and Their Recognition

By Courtney Bir, Brad Card, Zach Royko and Justin Talley. Learn about the main diseases faced by honeybees, as well as how beekeepers can recognize and address these problems.

Bees & Beneficial InsectsHoneybeesInsects, Pests, and DiseasesLivestockPesticides
VIEW ALL
MENUCLOSE