Carbon Strategy for the Food Industry
Carbon strategy is a term that refers to a systematic plan of action for managing carbon consumption and emissions related to food manufacturing and distribution activities. The impetus for carbon management strategy is rooted in several driving forces (Holcomb, 2010; Park, 2010):
- Global climate change issues
- Stakeholder and investor demands
- Environmentally and socially conscious consumers
- Government regulations and policies
- Return on investment
Interpretation and agreement with the first three driving forces varies widely, but the last two are universally accepted. The need for carbon management in the food industry is not a fad (Capper et al. 2010) and is soundly based on satisfying these driving forces.
The purpose of this fact sheet is to introduce the reader to the major concepts of carbon strategy in the food industry and list some proactive steps to develop an effective carbon management plan.
Three important terms are at the center of carbon consumption and emission issues for food processors:
- Green house gas (GHG)
- Carbon footprint
- Life cycle assessment (LCA)
Green house gasses (GHGs) absorb infrared radiation in the atmosphere. GHGs common in food processing activities are listed in Table 1.Most of the GHGs emitted from food processing plants are a result of the use of electricity, natural gas, coal, diesel, gasoline or other energy sources. For example, the combustion of natural gas results in the emission of carbon dioxide according to the following chemical formula:
- CH4 + 2O2 => CO2 + 2H2O + heat
Table 1. List of greenhouse gases (GHGs) that are common in the food processing industry, adjusted for heat retention characteristics relative to carbon dioxide (Blasing, 2000).
|GHG||Relative global warming potential|
|Carbon dioxide (CO2)||1|
|Nitrous Oxide (N2O)||298|
According to the U.S. Department of Energy (DOE, 2010), of the energy-related carbon emissions from the food industry, 40 percent result from use of electricity, 37 percent from natural gas and 17 percent from coal. Other sources of GHGs in food processing include emissions from waste water treatment plants, refrigeration systems, composting operations and land application of water (sprinklers).
The carbon footprint of a food manufacturing facility is a measure of the equivalent carbon dioxide emissions associated with ongoing activities. Calculation of the footprint can be plant-wide or focused on a particular service or product. Emissions are classified in three categories: scope 1, 2, and 3. The categories are defined as (World Resources Institute, 2004):
- Scope 1: Direct emissions – sources owned or controlled by the food processor (e.g., boiler, heater, cooker, vehicle fleet, waste water treatment). NOTE: GHGs not covered in the Kyoto Protocol (CFCs, NOx, etc.) are not included in scope 1.
- Scope 2: Electricity indirect emissions – those created by the use of purchased electricity.
- Scope 3: Other indirect emissions – those emissions that occur as a result of food processing activities but from sources not owned or controlled by the manufacturer (e.g., ingredients, freight, equipment manufacture, solid waste disposal, contractor, employee business travel). NOTE: Scope 3 is an optional reporting category.
Life cycle assessment (LCA) is a calculation of the cumulative effects of a food product or service on GHG emissions including acquisition of ingredients, production, product use and waste disposal. An LCA is used to study environmental impact and is commonly called a “cradle-to-grave” analysis. Primary components of an LCA are (Dantes, 2010): (1) environmental loads related to energy, raw materials, emissions and waste; (2) environmental impacts of loads; and (3) assessment of options to reduce impacts.
Importance of Carbon Strategy
Given the driving forces behind carbon management, the importance of developing and implementing a basic strategy is threefold (Wordsworth et al. 2004):
- Increasing competitiveness
- Enhancing reputation
- Regulatory compliance
A systematic plan of action, or strategy, is required to address carbon management in today’s food processing environment. Limited attention or disregard of carbon management may eventually reap destructive business results ranging from reduced sales to regulatory actions.
Suggestions for proactive measures to incorporate a carbon management strategy into a food industry business are listed below. Application should include a Pareto approach throughout strategy development and implementation to help identify the opportunities with the greatest return on investment. Business-wide continuous improvement processes also should include carbon management goals
- InventoryGHG emissions to establish a baseline footprint
- Overall facility
- Individual products
- ConsiderGHG emissions in core business strategy
- Product development (low or zero carbon products)
- Advertising and marketing
- Capital expenses
- Product development and design
- Assess internal opportunities to reduceGHG emissions
- Capital improvements
- High efficiency equipment
- Waste heat recovery
- Alternative energy sources
- Logistics improvements
- Packaging reduction and recycling
- Lean, six-sigma approach
- Capital improvements
- Establish third party emission reduction
- Sourcing locations
- Source measurement and evaluation
- Transportation modes
- Validate and verify results
- Disseminate results
- Stakeholders and investors
- Regulatory agencies
A carbon-constrained economy is a reality that businesses around the world must prepare for in earnest. Companies should focus on a developing a carbon management strategy that will prepare them to comply with upcoming regulation (Concessi, 2010) and increase competitiveness. This fact sheet outlines proactive steps to establish a carbon management strategy and provides a list of basic resources. If you would like guidance in the development of your carbon management strategy, please call the Robert M. Kerr Food & Agricultural Products Center at 405-744-6071 or e-mail firstname.lastname@example.org to request assistance.
Online Carbon Calculators
Results will vary significantly depending on the assumptions and methods used by each calculator. Most of the calculators do not provide information regarding their assumptions, conversion factors and calculation methods. Furthermore, many of the tools are designed for personal or household use only. Padgett et al. (2007) and Roche and Campanella (2010) have published comparisons of some carbon calculators.
Standards, Codes and Related Publications
New standards and codes are continuously developing for carbon management practices. The International Standards Organization (ISO) is particularly active in the forefront of this area. A search for new and updated standards should be conducted on a routine basis.
- BSI PAS 2050 Assessing the life cycle greenhouse gas emissions of goods and services
- BSI BS ISO 14064 Greenhouse gases parts 1, 2 and 3
- BIS ISO 14065 Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
- Code of good practice for product greenhouse gas emissions and reduction claims (CTC745)
- Product carbon footprinting: The new business opportunity pack (CTC744)
- Carbon footprinting – The next step to reducing your emissions (CTV043)
A corporate accounting and reporting standard
- GHG protocol for project accounting
- Guidance for quantifying GHG reductions from grid-connected electricity projects
- Land use, land-use change and forestry guidance for GHG project accounting
- Designing a custom GHG calculation tool
- Measuring to manage: A guide to designing GHG accounting and reporting programs
- Designing a U.S. greenhouse gas emissions registry
- TC 207/SC5 Life cycle assessment – Standards 14040 through 14049
- TC 207/SC7 Greenhouse gas management and related activities – Standards 14064 through 14069
Glossary of Terms
The following list of terms (arranged alphabetically) are commonly used when discussing carbon management strategy.
- Cap and trade: Also called emissions trading, the “cap” is a legal limit on the quantity of greenhouse gases that a region can emit each year and “trade” means that companies may swap among themselves the permission – or permits – to emit greenhouse gases.
- Carbon calculators: The calculator used to measure the carbon footprint of a product/activity/person. Predefined conversion factors like LCA and EIOLCA are used to calculate the footprint.
- Carbon footprint: Carbon footprint is a term used to describe the green house gas (GHG) emissions of an organization, product or a person and is measured in terms of carbon dioxide equivalents.
- Carbon permits: Also known as the emission permit, it is the fixed amount of GHG that may be released into atmosphere.
- Carbon strategy: Systematic plan of action for managing carbon consumption and emissions.
- Carbon tax: Policy instrument that sets a per-unit charge on emissions. Typically the system involves a tax on fuels that emit carbon dioxide when burned and on other greenhouse gas emission.
- Clean technology: A technology which reduces the use of natural resources and promotes use of renewable sources.
- Environmental footprint: Environmental impact any company or entity makes as it performs any activity. A footprint is determined by how well raw materials or byproducts are (or aren’t) absorbed by the surrounding environment.
- Food miles: The distance traveled by a food product from the farm to the store where it is purchased.
- Global warming potential: Potential of a given quantity of chemical to cause global warming over a specific time period compared to the same mass of CO2.
- Green house gas: Gases in an atmosphere that absorb and emit radiation within the thermal infrared range. Examples: Carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O).
- Life cycle assessment (LCA): A calculation of the cumulative effects of a food product or service on GHG emissions including acquisition of ingredients, production, product use and waste disposal. An LCA is used to study environmental impact and is commonly called a “cradle-to-grave” analysis.
- Locally sourced materials: Materials obtained from a defined radius around a project site, helping to support the local economy and reducing transportation costs and energy.
- Low carbon economy (LCE): An economy which has a minimal output of GHG into the atmosphere.
- Non-renewable resource: Use of material and energy sources that leads to depletion of the earth’s reserves that cannot be renewed in human-relevant periods of time. This includes coal, gas, oil and many mineral resources, like copper.
- Offsetting: To counterbalance, counteract or compensate for. Carbon offsetting is the act of mitigating greenhouse gas emissions through emissions trading.
- Polluter Pays Principle (PPP): Requires that the costs of pollution be borne by those who cause it.
- Renewable resource: A resource that can be used continuously without being depleted (because it regenerates itself within a useful amount of time).
- Sustainable: Anything that is capable of being continued without causing long-term effects on the environment.
- Whole-of-life cost: Total cost of ownership over the life of an asset.
Blasing, T.J. 2009. Recent greenhouse gas concentrations. Accessed on May 27, 2010.
Capper, J., Cady, R.A., and D. Bauman. 2010. Environmental sustainability: a benefit of animal productivity. A presentation prepared for the Southern Dairy Conference, Atlanta, Georgia. Accessed on May 27, 2010.
Concessi, P. 2009. Carbon management for a carbon constrained economy. Deloitte, LLP. Accessed on May 27, 2010.
Dantes, 2010. Glossary. Available at: www.dantes.info. Accessed on May 26, 2010.
DOE, 2010. Energy-Related carbon emissions for the food industry by source. Accessed on May 26, 2010.
Holcomb, R.B. 2010. Carbon 201. Presentation given at Food Industry Trends Conference, Robert M. Kerr Food & Agricultural Products Center, Oklahoma State University, Stillwater, Oklahoma. May 20th.
Padgett, J.P, A.C. Steinemann, J.H. Clarke, M.P Vandenbergh. 2007. A comparison of carbon calculators. Environmental Impact Assessment Review. Elsevier, Inc. doi: 10.1016/j.eiar.2007.08.001. Vol. 28: 106-11.
Park, C. 2010. Preparing for success in the carbon-constrained economy. Accessed on May 26, 2010.
Roche, P. and C. Campanella. 2010. Carbon counting in architecture: a comparison of carbon estimating tools. Accessed on June 23, 2010.
Wordsworth, A, R. Kwartin, A. Karmali. 2004. The carbon trust’s carbon management program: description and evaluation of pilot phase results, ACEEE paper 206.
World Resources Institute. 2004. The greenhouse gas protocol a corporate accounting and reporting standard, revised edition. Washington, DC.
FAPC Food Process Engineer